To view emissions readiness status:

1. Connect to the vehicle.

   • Note: In order to view Monitors with the Diagnostics VCI, you must be connected with a Generic OBDII connection through one of the following methods:

     • 

     • 

2. From the Diagnostics or Basic Diagnostics app, select Monitor from the sidebar menu.

   

3. The status of the Emissions Monitors display.
   

The Emissions Monitors Screen

• Since DTC's Cleared / Current Drive Cycle

  • ​Toggle between viewing historic data (since the last time the memory was cleared) and the current drive cycle.

• Continuous

  • Displays the status of emissions-related monitors that are running at all times.

• Non Continuous

  • Displays the status of emissions-related monitors that must complete full drive cycles or meet specific operating conditions to activate.

• Monitored Test Results (Requires Diagnostics VCI)

  • ​Displays current values and ranges for monitored components.

• Clear Active Codes

  • ​​Clears all active codes that are currently being held by the vehicle's ECU.

    • Note: This will also reset all emissions readiness monitors.